Product ID:A-A-1558 CLASS 2, 37038 BLACK STENCIL PAINT
MSDS Date:09/27/1989
FSC:8010
NIIN:00-285-4911
MSDS Number: BMXGL

FARWEST PAINT MANUFACTURING CO

4522 SOUTH 133RD STREET
TUKWILA, WA 98168
US

Emergency Phone: 206-941-1619

Info Phone: 206-244-8844

Cage: 2F266

FARWEST PAINT MANUFACTURING CO

TUKWILA, WA 98168 US

Telephone: 206-244-8844

Cage: 2F266

VM & P NAPTHA, ALIPHATIC HYDROCARBONS

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 22.6%

OSHA PEL 500 PPM

ACGIH TLV: 300 PPM

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 3.0%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: THIS MATERIAL MAY CAUSE
IRRITATION, SENSITIZATION, OR DEFATTING OF SKIN UPON PROLONGED OR
REPEATED CONTACT. SOME REPORTS HAVE ASSOCIATED REPEATED & PROLONGED
OCCUPATIONAL OVEREXPOSURE TO SOLVENT WITH PERMANENT BRAIN AND
NERVOUS SYSTEM DAMAGE. EYES: THIS MATERIAL MAY BE AN EYE IRRITANT.
Explanation of Carcinogenicity:THIS PRODUCT CONTAINS NO KNOWN
CARCINOGENS IN REPORTABLE QUANTITIES AS DEFINED BY ACGIH, OSHA,
NTP, IARC.
Effects of Overexposure:INHALATION: EXCESSIVE EXPOSURE TO VAPORS OR
SPRAY MISTS CAN RESULT IN HEADACHE, DIZZINESS, NAUSEA AND LOSS OF
CONSCIOUSNESS.
Medical Cond Aggravated by Exposure:NONE WHEN USED IN ACCORDANCE WITH
SAFE HANDLING INSTRUCTIONS.

First Aid:SKIN: PROMPTLY WASH W/SOAP & WATER. REMOVE & WASH
CONTAMINATED CLOTHING BEFORE REUSE. EYES: FLUSH W/WATER 15 MIN, &
GET MED AID. INGESTION: IF INGESTED, DON'T INDUCE VOMITING, KEEP
PERSON WARM, QUIET, & GET MED AID. ASPIRATION OF MATERIAL INTO
LUNGS CAN CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE FATAL. INHAL:
REMOVE TO FRESH AIR IMMED. IF RESPIRATORY SYMPTOMS DEVELOP, GET MED
AID AT ONCE.

Flash Point:50.0F,10.0C
Lower Limits:1.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS WITH A FULL
FACEPIECE OPERATED IN PRESSURE-DEMAND OR OTHER POSITIVE PRESSURE
MODE.
Unusual Fire/Explosion Hazard:NEVER USE NEAR OR AROUND WELDERS OR
CUTTING TORCHES. DRUM (EVEN EMPTY) BECAUSE PRODUCT (EVEN JUST
RESIDUE) CAN IGNITE EXPLOSIVELY.

Spill Release Procedures:REMOVE IGNIT SOURCES. VENT AREA. ABSORB SPILL
W/ABSORBENT MAT'L (SAWDUST, VERMICULITE, SAND). PLACE MAT'L INTO
CLOSED CONTAINER. IF LARGE SPILL, DIKE AREA TO PREVENT THIS MAT'L
FROM ENTERING WATER SYS TEMS/SEWERS. WEAR PROTECT EQUIP DURING
CLEANUP.

Handling and Storage Precautions:GROUND HANDLING EQUIPMENT TO PREVENT
SPARKS. AVOID PROLONGED OR REPEATED INHALATION OF HEATED VAPORS OR
SPRAY MISTS. KEEP AWAY FROM HEAT/IGNIT SOURCE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. MAT'L MAY CAUSE
SENSITIZATION. DON'T GET IN EYES, ON SKIN/CLOTHING. DON'T ALLOW
CONTAMINATED CLOTHING TO CONTACT SKIN. DON'T WELD ON FULL/EMPTY
CNTNRS. KEEP CNTNRS CLSD WHEN NOT IN USE & PROPERLY LABLED.

Respiratory Protection:CANISTER-TYPE RESPIRATOR MUST BE WORN TO PREVENT
INHALATION OF VAPORS OR SPRAY MISTS WHEN TLV/PEL EXCEEDED.
Ventilation:GENERAL VENT IS REQUIRED DURING NORMAL USE. LOCAL VENT MAY
BE REQUIRED DURING CERTAIN OPERATIONS TO KEEP BELOW TLV/PEL.
Protective Gloves:CHEM RESIST NITRILE, NEOPRENE, RUBBER
Eye Protection:WEAR FACE SHIELD OR CHEMCIAL GOGGLES.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING TO PREVENT SKIN
CONTACT. EYE WASH STATIONS & SAFETY SHOWER SHOULD BE AVAILABLE.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health

HCC:F2
Boiling Pt:B.P. Text:228 TO 282F
Vapor Pres:22.0 @ 20C
Vapor Density:> AIR
Spec Gravity:11.60 LBS/GAL
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:BLACK MEDIUM VISCOUS LIQUID WITH A MILD SWEET
AROMATIC ODOR.
Percent Volatiles by Volume:48.5

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDANTS, ACIDS, BASES AND EPOXY HARDENERS
UNDER UNCONTROLLED CONDITIONS.
Stability Condition to Avoid:HEAT SPARKS & OPEN FLAMES. IF PRODUCT
CONTAINS ALUMINUM, MOISTURE IN CLSD CNTNRS WILL GENERATE HYDROGEN
GAS.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD CARBON
MONOXIDE AND TOXIC VAPORS.

Waste Disposal Methods:TREAT MAT'L & CNTNR AS HAZARDOUS WASTE BASED ON
IGNIT CHARACTERISTIC AS DEFINED UNDER FED RCRA REGS (40 CFR 261).
MAT'L DISPOSAL/CNTNR REQUIRES COMPLIANCE W/APPLIC
LABELING/PACKAGING/ RECORDKEEPING ST DS. DISPOSE IN ACCORD W/LOCAL,
STATE, FED AGENCIES

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.